Vernice
Siser Vernice is the only high gloss product in the range, it’s a thin 90 microns and comes with a non-adhesive carrier. Vernice is so thin that it warrants easy cutting, weeding, and application making it ideal for fashion garments. Perfect for application to Cotton, Polyester, Poly/Cotton blends, and Lycra/ Spandex this product is both REACH compliant and VeganOK Certified.
Application Instructions
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 10 -15 seconds
6. Peel carrier hot or cold
7. If areas of design lift after application, place cover sheet and re-press for 5 – 10 seconds
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 150°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 15 seconds
5. Peel carrier cold
Technical Data
- 45° blade
- PU Composition
- 90 microns
- Laser friendly
- Layerable as top layer only
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
Suitable Textiles
- 100% Cotton
- Poly/Cotton Blends
- 100% Polyester
- Leather
