Stripflock Pro
Stripflock Pro is the only Flock in the industry that can be layered on itself. Thick enough to cover hat seams, and look amazing on denim and garments it can even be covered with other HTV like EasyWeed Stretch to create an embossed look or layered upon itself to give even more of a 3D effect. There are over 20 vibrant colours in the range and it’s suitable for Cotton, Polyester, Poly/Cotton Blends and Leather. StripFlock Pro is also Oeko-Tex and VeganOK Certified and 410 microns thick comprising of PVC.
Application Instructions
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 10 -15 seconds
6. Peel carrier hot or cold
7. If areas of design lift after application, place cover sheet and re-press for 5 – 10 seconds
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 150°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 15 seconds
5. Peel carrier warm
Technical Data
- 45° blade
- PVC Composition
- 410 microns
- Layerable
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
Suitable Textiles
- 100% Cotton
- Poly/Cotton Blends
- 100% Polyester
- Leather
