PS Lumen
PS Lumen is available in white which glows green in the dark. It cuts and weeds just like our popular EasyWeed Heat Transfer Vinyl and has the same application settings. In order for the glow to take effect you need to ‘charge’ the material. You do this by exposing it to sunlight, the more sun it gets the brighter it stays for longer. This product is perfect for kids costumes, Halloween, and anything that needs that extra bit of glow!
Application Instructions
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 10 -15 seconds
6. Peel carrier hot or cold
7. If areas of design lift after application, place cover sheet and re-press for 5 – 10 seconds
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 150°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 15 seconds
5. Peel carrier hot or cold
Technical Data
- 45° blade
- PU photoluminescent (white with yellow photoemission) Composition
- 100 microns
- Laser friendly
- Layerable
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
Suitable Textiles
- 100% Cotton
- Poly/Cotton Blends
- 100% Polyester
- Leather
