Holographic
Holographic will take your designs to a new level – with over 20 special effect colours including two translucent colours; Rainbow Pearl and Spectrum which will give your designs the opalescent finish that changes depending on the colour of the garment. Siser Holographic is 110 microns thick and is comprised of Polyester making it suitable for garments that do not require a lot of stretch.
Suitable materials include cotton, polyester, poly/cotton blends and leather.
Application Instructions
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 10 -15 seconds
6. Peel carrier cold
7. If areas of design lift after application, place cover sheet and re-press for 5 – 10 seconds
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 160°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 15 – 20 seconds
5. Peel carrier cold
Technical Data
- 45° blade
- PU Composition
- 110 microns
- Laser friendly
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
Suitable Textiles
- 100% Cotton
- Poly/Cotton Blends
- 100% Polyester
- Leather
PLEASE NOTE:
Due to the way the Pearl colours are manufactured, there may be variations in the colours from batch to batch.
Holographic Rainbow Pearl gives your designs an opalescent finish that changes depending on the colour of the garment. The material will not look the same on a black garment as it will on a white garment.