Hi-5
Hi-5 has a super-fast application process of 120°c at 5 seconds. This product has been specifically created for the polyester-based technical fabrics that don’t play well with heat. The Low temperature helps prevent undesirable effects such as glossiness, fibre damage, and burning. Hi-5 is both Oeko-Tex and VeganOK Certified, 90 microns thick and can be layered. It’s also suitable for Cotton, Polyester and Poly/Cotton blends.
Application Instructions
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 10 -15 seconds
6. Peel carrier hot or cold
7. If areas of design lift after application, place cover sheet and re-press for 5 – 10 seconds
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 120°C for textiles thinner than 150 g/qm and 150°C for textiles thicker than 150 g/qm (EasyPress® users add approx. 30°)
4. Use high pressure for 5 seconds
5. Peel carrier hot or cold
Technical Data
- 45° blade
- PU Composition
- 90 microns
- Layerable
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
Suitable Textiles
- 100% Cotton
- Poly/Cotton Blends – not for dye sublimated fabrics, performance wear, Elastane
- 100% Polyester
