EasyWeed Extra
Easyweed Extra is compatible with all craft cutters. Specially formulated to work with difficult materials like nylon, leather and silicon treated clothing. The Oeko-tex certified film (HTV) will help you personalise even the toughest of projects. With the option to peel either hot or cold, you can be assured your project will adhere to your garment. Because Extra is part of the Easyweed family, you can confidently layer a design for maximum creativity.
Application Instructions
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 10 -15 seconds
6. Peel carrier hot or cold
7. If areas of design lift after application, place cover sheet and re-press for 5 – 10 seconds
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 150°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 15 seconds
5. Peel carrier hot or cold
Technical Data
- 45° blade
- PU Composition
- 90 microns
- Laser friendly
- Layerable
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
Suitable Textiles
- 100% Cotton
- Poly/Cotton Blends
- Nylon
- 100% Polyester
- Leather
