Brick 600
Perfect for caps, bags and chest logos this trendy product can be used on Cotton, Polyester and Poly/Cotton Blends. Siser Brick 600 is 600 microns thick and is layerable only if using the embossed method of heat application. Available in a range of colours and both Oeko-Tex and VeganOK compliant this thick product cuts and weeds easy making application a dream!
Application Instructions
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 20 seconds
6. If areas of design lift after application, place cover sheet and re-press for 10-15 seconds
7. Peel carrier cold
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 155°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 20 seconds
5. Peel carrier cold
Technical Data
- 60° blade
- PU Composition
- 600 microns
- Laser friendly
- Iron On
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
Suitable Textiles
- 100% Cotton
- Poly/Cotton Blends
- 100% Polyester