Brick 1000
Brick® is available in 7 bright basic colours allowing you to bring dimension to any product! It is layerable as the top layer only and despite its 1000 micron thickness, it cuts and weeds like a dream! Brick® is REACH compliant, Oeko-Tex, and VeganOK certified. Brick has a glossy finish, a non-adhesive polyester carrier, and is a cold peel that is suitable for Cotton, Polyester, and Poly/Cotton blends. It is not suitable for treated and dye sublimated textiles.
Application Instructions
Home iron instructions
1. Set iron dial between Cotton and Linen
2. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
3. Place on flat, hard surface (ironing board not recommended)
4. Press iron with medium/firm pressure (do not slide iron)
5. Press each section of design for 20 seconds
6. If areas of design lift after application, place cover sheet and re-press for 10 – 15 seconds
7. Peel carrier cold
Heat Press Instructions
1. Cover with Heat Transfer Cover Sheet or Multipurpose Paper
2. Preheat garment for 2-3 seconds
3. Apply design at 155°C (EasyPress® users add approx. 30°)
4. Use medium pressure for 20 seconds
5. Peel carrier cold
Technical Data
- 60° blade
- PU Composition
- 1000 microns
- Laser friendly
- Iron On
Washing Instructions
Wait 24 hours before first wash. Machine wash cold with mild detergent. Dry on normal dryer setting. Do not bleach or dry clean. Liquid fabric softener not recommended.
Suitable Textiles
- 100% Cotton
- Poly/Cotton Blends
- 100% Polyester